Photo of Precix 9100 4x8 router. Existing control is the black box
with the red E-stop button on the front left.
Monitor stand and inverter. Keyboard and monitor to be replaced
by laptop running UCCNC.
Back of control box. The plan is to leave the cable connectors intact once
they are removed from the old control. I will build a cable connector
conversion box that will input these connectors from one side and output
to the RJ45 connectors on the opposite side. This way I can always revert
back to the original control if needed. Plus during construction and testing
of the new UCCNC control I can still revert back and use the CNC thus
eliminating any serious down time. That is the plan anyway......we'll see
how it works out.
Another view of the back of the existing control.
~5hp spindle
X and Y axis servos.
X & Y axis servos.
Z-axis servo.
Z-axis servo.
Z-axis servo.
X & Y axis servo encoder type.
X & Y axis servo encoder type.
X & Y axis cable connection.
Z-axis encoder.
AutoCAD plan for new control layout
New control board under construction. 120v supply voltage.